Vinci replacement pod options
Each pod is supplied empty in a 2-pack and accepts the full Voopoo PnP coil range (sold separately). Pick by which kit you own and which physical pod format you need.
| Pod | Compatible kit |
|---|---|
| Vinci 3 2ml Pod (Pack of 2) | Standard format pod for the Vinci 3 kit |
| Vinci 3 XL Pod (Pack of 2) | Larger XL format pod for the Vinci 3 kit, UK TPD-restricted to 2ml fill |
| Vinci 2 Replacement XL Pods | XL format pod for the older Vinci 2 kit, UK TPD-restricted to 2ml fill |
About Vinci replacement pods
Voopoo's Vinci replacement pods are empty cartridges, not sealed pods with built-in coils. The pod itself holds the e-liquid and accepts a separate PnP coil that pushes into the base of the pod. When the coil burns out, you can keep the same pod and swap just the coil. When the pod's wicking ports start to look discoloured or e-liquid begins to seep through to the air channel, you swap the pod and keep the coil. This split design works out cheaper long-term than sealed pods, and gives you full flexibility over which PnP coil resistance you fit.
All Vinci pods on this page are constructed from PCTG food-grade plastic with a transparent body so you can see remaining e-liquid through the side window. The pods attach to the device via strong magnets, which keeps them seated firmly during everyday handling but lets you remove them cleanly for refills or coil swaps.
PnP coil platform compatibility
Every Vinci pod on this page accepts the full Voopoo PnP coil range, which spans 0.15 ohm sub-ohm DTL options through to 1.0 ohm and 1.2 ohm tighter MTL coils. The PnP platform is the brand's biggest practical advantage: the same coils work across Drag, Argus and Vinci devices that share the platform, so upgrading from a Vinci to a Drag X3 or Argus pod kit doesn't force you onto a new coil ecosystem. The full PnP coil range is stocked on our consolidated PnP replacement coils page covering PnP, PnP-X, PnP-VM, PnP-TM, PnP-TM1 and PnP-TR1 sub-platforms.
Top-fill design
All three Vinci pods on this page use a top-fill design that doesn't require you to remove the pod from the kit to refill it. Lift the mouthpiece (or a small silicone stopper, depending on the pod generation), drip your e-liquid below the maximum fill line, and replace the cap. The cross-fill port balances air as the pod fills, which prevents the air-lock issues that older bottom-fill pods suffer from. After refilling, wait five to ten minutes for the coil to wick fully before the first puff, particularly if you've just swapped to a fresh coil.
Vinci 3 vs Vinci 2: which pods do I need?
The two kits use different pod fittings and the pods are not cross-compatible. The Vinci 3 launched in 2022 and uses a redesigned pod that integrates more flush with the device body. The Vinci 2 is the older 2021 generation and uses a different magnetic mounting and pod profile. Always check your kit before ordering: the Vinci 3 pod will not fit a Vinci 2 device and vice versa, even though both pods accept the same PnP coil range.
Within the Vinci 3 range, the 2ml standard pod and the XL pod are both legally restricted to 2ml capacity in the UK under TPD regulations. The XL pod is physically larger but the fill chamber is the same UK-compliant size; the difference is in the pod's external dimensions and how it sits in the device, not in the e-liquid you can put inside it. Either Vinci 3 pod works equally well in the kit.
Buy Vinci replacement pods from e-liquids.com
- Free UK delivery on orders over £20
- Same-day dispatch on orders placed before our daily cut-off
- Genuine Voopoo UK stock, all 2ml TPD-compliant
- Both Vinci 2 and Vinci 3 generations covered
- UK customer support on 0121 272 2900
Vinci pods: frequently asked questions
Are the Vinci 3 and Vinci 2 pods cross-compatible?
No. The Vinci 3 and Vinci 2 use different pod profiles and magnetic fittings. A Vinci 3 pod will not fit a Vinci 2 device and vice versa. Both pod ranges accept the same PnP coil platform, but the pod itself is specific to the kit you own. Always check your kit generation before buying.
Are coils included with the Vinci pods?
No. The Vinci replacement pods on this page are sold empty, without a PnP coil pre-installed. You'll need to fit a separate PnP coil into the base of the pod before filling and using it. The full PnP coil range is stocked on our PnP replacement coils page covering all sub-platforms and resistances.
What's the difference between the Vinci 3 standard and Vinci 3 XL pods?
In the UK, both versions hold 2ml of e-liquid in line with TPD regulations. The XL pod is a physically larger format that's sized for international markets where larger fills are permitted; the standard 2ml pod is the smaller format. Both work in the Vinci 3 kit and both accept the same PnP coils. Pick whichever physical format you prefer; the vape experience is identical at UK fill capacity.
How do I refill a Vinci pod?
Lift the mouthpiece or silicone stopper on the top of the pod, insert the nozzle of your e-liquid bottle into the fill port, and drip until the e-liquid sits just below the maximum line. Press the cap firmly back into place, wait five to ten minutes for the coil to wick fully, then start vaping. The pod can stay clicked into your device throughout the process.
How long does a Vinci pod last?
Pod life depends on the e-liquid type and the wattage you run. Most adult vapers get four to six weeks of regular use from a single pod before the wicking ports start to look discoloured and a replacement is needed. The PnP coil inside the pod is replaced more frequently, typically every one to two weeks depending on usage and e-liquid type.
What e-liquid works best with Vinci pods?
It depends on the PnP coil you fit. Lower-resistance coils (0.15, 0.2 or 0.3 ohm) suit higher VG freebase e-liquids at lower nicotine strengths for a warmer DTL draw. Higher-resistance coils (0.6, 0.8, 1.0, 1.2 ohm) suit nic salts or 50/50 PG/VG e-liquids paired with a tighter MTL or RDL inhale. The Vinci pod itself is neutral, the coil determines the experience.
Do the Vinci pods fit the Vinci E80?
No. The Vinci E80 uses a different pod platform: the supplied Vinci E pods (with built-in coils) or the empty Vinci PnP-X cartridge stocked on our PnP-X pods page. The Vinci 2 and Vinci 3 pods on this page are specific to those older Vinci kits and are not interchangeable with the E80's pod system.