Vinci E80 colour finishes
Every Vinci E80 uses the same internals and the same lightweight aluminium alloy chassis. The only thing changing across the range is the colour and finish of the outer panel.
| Colour | Finish |
|---|---|
| Gold | Warm metallic gold, premium finish |
| Green | Deep matte forest green |
| Rose Red | Rich rose-red, bold and statement |
| Orange-Red Gradient | Warm orange fading to red, gradient finish |
| Purple-Gold Gradient | Purple fading to gold, distinctive gradient |
About the Voopoo Vinci E80
The Vinci E80 is the most powerful kit in the current Vinci range and one of Voopoo's lightest 80W pod kits. The chassis is built around an aluminium alloy frame with PC components and weighs just 88.8g empty (around 105g with a pod fitted), which is unusually light for a 3000mAh device. The candy bar form factor sits flat in the hand with the fire button positioned naturally under the thumb whether held left or right handed.
Functionally, the E80 sits between traditional pod kits and full sub-ohm pod mods. The 5-80W output range covers MTL through to full DTL with the same device, and the dual pod compatibility (Vinci E pods with built-in coils plus the optional empty Vinci PnP-X cartridge with replaceable coils) gives you a choice between simplicity and flexibility. Smart Mode reads pod resistance and sets a starting wattage automatically; RBA Mode hands full wattage control over to you between 5W and 80W.
80W output and 3000mAh battery
The 3000mAh internal battery is one of the largest in any 80W slim pod kit, and the practical advantage shows up in runtime. At MTL wattages with the 0.6 ohm pod, most adult vapers see two to three days of regular use between charges. At higher DTL wattages with the 0.3 ohm pod at 35-50W, you'll typically get a full day of heavy use. USB-C 5V/2A fast charging fills the device in around 60 minutes from flat, and the Vinci E80 supports pass-through vaping so you can use the device while charging.
The GENE AI 2.0 chipset handles power delivery with rapid response times, smart coil detection and a stack of integrated safety protections. Output stays steady through the full battery cycle rather than tapering as the cell drains, which keeps flavour and vapour consistent right up to the low-battery cut-off.
1.47-inch TFT screen and three display themes
The 1.47-inch TFT colour screen is the largest in the slim pod kit category and gives you full visibility of the key vaping stats: wattage, battery percentage, pod resistance and puff count. The screen stays readable in direct sunlight, which is unusual at this price point. Three display themes ship with the device for different visual styles, all with the same underlying information density. A slide-lock switch on the side disables both the fire button and the wattage adjustment buttons when locked, which prevents misfires when the device is in a pocket or bag.
Vinci E pods and Golden Cotton wicking
The Vinci E80 ships with two Vinci E pods: a 0.3 ohm pod for DTL vaping and a 0.6 ohm pod for MTL or RDTL. Each 2ml UK TPD-compliant pod has a built-in mesh coil and refills via a side-fill port with a silicone stopper. The pod stays seated in the device throughout the refill process.
The Vinci E pod's standout feature is the Golden Cotton wicking material, which Voopoo rates for up to 260 degrees heat resistance and roughly 100ml of e-liquid endurance per pod before flavour drops off. The pod uses a double-sealed leak-resistant structure that keeps e-liquid contained even when fully horizontal, and the longer wick saturation path produces a noticeably cleaner flavour at the higher wattages this kit is designed for.
PnP-X coil platform compatibility
Beyond the supplied Vinci E pods, the Vinci E80 is fully compatible with the wider PnP-X pod cartridge range. Drop in an empty Vinci PnP-X cartridge and you can swap individual PnP-X coils instead of replacing the whole pod. The full PnP-X coil range is supported from 0.15 ohm sub-ohm DTL options through to 1.0 ohm tighter MTL coils, which means the same E80 device can run flavour-chasing high-power coils, balanced RDTL coils or tight MTL coils depending on the pod and coil combination installed.
Buy the Vinci E80 from e-liquids.com
- Free UK delivery on orders over £20
- Same-day dispatch on orders placed before our daily cut-off
- Genuine Voopoo UK stock, TPD-compliant 2ml pods
- Five colour finishes covered, including the Purple-Gold and Orange-Red gradient options
- UK customer support on 0121 272 2900
Vinci E80: frequently asked questions
What is the difference between the Vinci E80 and the Drag X3?
Both kits run at up to 80W and both use the PnP-X coil platform, but they differ in battery and form factor. The Vinci E80 has a 3000mAh internal battery and a slim candy bar shape weighing 88.8g, designed for portability. The Drag X3 takes external 18650 or 21700 batteries (sold separately) and adds a touchscreen and capacitive unlock, designed for vapers who want swappable cells and finer control.
Which pods fit the Vinci E80?
The Vinci E80 accepts the supplied Vinci E pods (0.3 ohm and 0.6 ohm, with built-in coils) and the optional empty Vinci PnP-X cartridge, which uses replaceable PnP-X coils. The PnP-X coil range covers 0.15 ohm through 1.0 ohm. All compatible pods and coils are listed on the PnP-X pods and PnP coils pages.
How long does the Vinci E80 battery last?
The 3000mAh battery is one of the largest in any slim 80W pod kit. At MTL wattages with the 0.6 ohm pod, most adult vapers see two to three days of regular use. At DTL wattages with the 0.3 ohm pod at 35-50W, you'll typically get a full day of heavy use. USB-C 5V/2A fast charging fills the device in around 60 minutes, and pass-through vaping is supported so you can use the kit while charging.
What is Golden Cotton?
Golden Cotton is the wicking material used inside Vinci E pods. It's rated for up to 260 degrees heat resistance and is paired with a longer wick saturation path than standard pod cotton, which Voopoo rates for around 100ml of e-liquid endurance per pod before flavour drops off. The cleaner saturation reduces dry hits at the higher wattages this kit is designed for.
Can I use nic salts in the Vinci E80?
Yes, with the right pod. The 0.6 ohm Vinci E pod is designed for nic salts and 50/50 PG/VG e-liquids paired with an MTL or RDTL draw. The 0.3 ohm pod and 0.15 ohm PnP-X coils are designed for higher VG freebase e-liquids at lower nicotine strengths. Using nic salts in the 0.3 ohm pod is possible but the warmer DTL output may make 20mg nicotine strengths feel harsh.
Is the Vinci E80 button-fired or draw-activated?
The Vinci E80 fires by button only. There is no draw-activation mode on this kit, which is one of the design differences versus the simpler Argus pod range. The fire button sits centrally on the front of the device and falls naturally under the thumb. A side slide-lock switch disables the fire and adjustment buttons when not in use to prevent misfires.
Is the Vinci E80 a coil change or pod change device?
It's both, depending on the pod you fit. The supplied Vinci E pods have built-in coils, so you replace the whole pod when flavour drops off. The optional empty Vinci PnP-X cartridge takes replaceable PnP-X coils, which means you keep the same pod and swap individual coils. The empty cartridge route is cheaper long-term; the Vinci E pod route is simpler and tidier.