Vaporesso Luxe X Pro pod kit: key specifications
| Specification | Detail |
|---|---|
| Battery | 1500mAh built-in, USB-C 5V/1.5A charging |
| Max output | 40W (5W to 40W adjustable) |
| Screen | 0.42 inch OLED, shows wattage, battery, resistance, puff count |
| Smart mode | AXON chipset auto-detects pod resistance and sets wattage |
| Firing method | Draw activated and button activated |
| Wattage adjustment | Plus and minus buttons below the screen |
| Airflow | Pod rotation 180 degrees for tighter or airier draw |
| Safety | Triple-click lock button |
| Included pods | 0.4 ohm Luxe X mesh pod and 0.6 ohm Luxe X mesh pod |
| Pod fill method | Bottom-fill sealed port |
| Pod compatibility | All Luxe X pods (0.3, 0.4, 0.6, 0.8 ohm), Luxe XR pods with GTX coils |
| Pod capacity | 2ml (UK TPD compliant) |
| Dimensions | 99.1mm x 32mm x 23.4mm |
| In the box | Device, 0.4 ohm pod, 0.6 ohm pod, USB-C cable, user manual |
About the Vaporesso Luxe X Pro pod kit
The Luxe X Pro sits below the Luxe X2 and X3 in the range and is the most compact Luxe X device at 99.1mm tall. It introduces adjustable wattage to the Luxe X family via plus and minus buttons below the 0.42 inch OLED screen, and adds draw activation alongside the fire button. Smart mode automatically detects whichever pod you install and sets an appropriate wattage, so manual adjustment is only needed for fine-tuning. Airflow is adjusted by rotating the pod 180 degrees rather than a side slider, giving a simple two-position control between tighter and airier draws.
The 0.4 ohm pod suits a loose RDTL draw with freebase or 50/50 e-liquid at lower nicotine strengths. The 0.6 ohm pod suits a moderate MTL draw and works well with nic salts. Recommended wattages are 26 to 32W for the 0.4 ohm pod and 20 to 30W for the 0.6 ohm pod. Luxe XR pods with GTX coils are compatible, extending the range further, though the 40W ceiling means very low resistance sub-ohm GTX coils are limited in performance on this device compared to the Luxe XR Max 2.
Vaporesso Luxe X Pro colours
The Luxe X Pro is available in 6 colours. The colour name links to the product.
| Colour | Finish |
|---|---|
| Black | Matte black metallic finish |
| White | Clean white metallic finish |
| Blue | Bold blue metallic finish |
| Pink | Soft pink metallic finish |
| Ultra Orange | Bold ultra orange metallic finish |
| Gunmetal Lime | Two-tone gunmetal with lime green accent |
Buy the Vaporesso Luxe X Pro from e-liquids.com
- All 6 Luxe X Pro colours in stock
- Luxe X COREX 2.0 replacement pods available in all resistances
- Luxe XR replacement pods and GTX coils available
- Free UK delivery on all orders over £20
- Same-day dispatch on orders placed before cut-off
- UK-based customer team on 0121 272 2900
Vaporesso Luxe X Pro: frequently asked questions
What is the difference between the Luxe X Pro and the Luxe X2?
The Luxe X2 has a larger 2000mAh battery versus the Pro's 1500mAh and ships with 0.6 and 0.8 ohm COREX 2.0 pods for MTL vaping. The Luxe X Pro ships with 0.4 and 0.6 ohm pods covering RDTL and MTL, and uses pod rotation for airflow adjustment rather than the X2's side slider. Both have OLED screens and adjustable wattage up to 40W, though the X2 uses an LED indicator only while the Pro has a full OLED display with wattage readout. The Pro is the most compact of the two at 99.1mm versus approximately 108mm for the X2.
How do I adjust airflow on the Luxe X Pro?
Airflow on the Luxe X Pro is adjusted by rotating the pod 180 degrees within the device. One orientation gives a tighter draw and the other gives a slightly airier draw. This is different from the side slider used on the Luxe X2 and X3. There is no continuously adjustable slider on the Luxe X Pro — it is a two-position system based on pod rotation.
Can I use GTX coils with the Luxe X Pro?
Yes, via Luxe XR pods. GTX coils fit into Luxe XR pods which then clip into the Luxe X Pro. The 40W maximum output means very low resistance sub-ohm GTX coils (0.15 and 0.2 ohm) designed for higher wattages will underperform on this device. The GTX range from 0.4 ohm upwards works well within the 40W ceiling. For high-power DTL vaping with low-resistance GTX coils, the Luxe XR Max 2 at 80W is the more suitable device.