Vaporesso GTX One Pro kit: key specifications
| Specification | Detail |
|---|---|
| Battery | 3000mAh built-in, USB-C 2A fast charging |
| Max output | 40W (5W to 40W adjustable) |
| Screen | 0.87 inch OLED, 7 indicators including wattage, battery, resistance, puff count, mode, lock status |
| Chipset | AXON with Smart mode (auto-detects coil resistance) |
| Firing | Button activated |
| Safety | Physical lock button |
| Tank | Vaporesso xTank T, 2ml (UK TPD compliant) |
| Tank fill | Top fill |
| Airflow | Adjustable top airflow ring, MTL to RDTL |
| Included coils | 0.6 ohm GTX Mesh (pre-installed) and 1.2 ohm GTX Mesh |
| Coil compatibility | GTX coils 0.4 to 1.2 ohm |
| Body finish | PU leather or silicone (varies by colour) |
| Dimensions | 137.2mm x 23.2mm x 30mm |
| In the box | Device, xTank T, 0.6 ohm coil (pre-installed), 1.2 ohm coil, extra glass, USB-C cable, drip tip, user manual |
About the Vaporesso GTX One Pro kit
The GTX One Pro is different from every other device in the Vaporesso range on this site. It is a tank kit, not a pod kit. The difference matters: the xTank T uses replaceable GTX coils that screw into the tank base, rather than the snap-in pods used on the XROS or Luxe X ranges. When a coil burns out, you unscrew and replace the coil only, keeping the tank and glass. The xTank T also has a proper top airflow ring for precise MTL to RDTL adjustment, and a top-fill port that opens without removing the tank from the device.
Smart mode automatically detects the installed GTX coil resistance and applies an appropriate wattage. Manual adjustment in 0.5W increments is available via the plus and minus buttons below the screen. The 3000mAh battery is the key upgrade over the original GTX One which had 2000mAh. For an MTL vaper using the 1.2 ohm coil at 8 to 12W, three days between charges is realistic. For RDTL with the 0.6 ohm coil at around 24W, a full day to a day and a half is expected.
Vaporesso GTX One Pro colours
The GTX One Pro is available in 5 colours. The colour name links to the product.
Buy the Vaporesso GTX One Pro from e-liquids.com
- All 5 GTX One Pro colours in stock
- GTX replacement coils available across all resistances
- xTank replacement glass available
- Free UK delivery on all orders over £20
- Same-day dispatch on orders placed before cut-off
- UK-based customer team on 0121 272 2900
Vaporesso GTX One Pro: frequently asked questions
What is the difference between the GTX One Pro and a pod kit?
The GTX One Pro uses a tank with replaceable GTX coils rather than snap-in pods with built-in coils. When the coil burns out on a pod kit, you replace the whole pod. On the GTX One Pro, you replace only the GTX coil inside the xTank T tank and keep the glass and tank body. This makes ongoing costs lower per coil change. The tank also has a proper airflow ring for more precise MTL to RDTL adjustment than most pod kits offer. If you prefer the simplicity of snap-in pods, the XROS or Luxe X range is better suited.
Which GTX coils are compatible with the GTX One Pro?
The GTX One Pro is compatible with GTX coils from 0.4 ohm to 1.2 ohm. The kit ships with a 0.6 ohm coil pre-installed for RDTL vaping at 20 to 26W, and a 1.2 ohm coil for tight MTL vaping at 8 to 12W. GTX 0.4 and 0.8 ohm coils are also available separately. Note that very low resistance GTX coils below 0.4 ohm designed for high-wattage DTL vaping are not compatible with the 40W ceiling of the GTX One Pro.
What e-liquid should I use with the GTX One Pro?
With the included 1.2 ohm coil for MTL vaping, 50/50 or high-PG nic salt e-liquid at 10mg to 20mg works best. With the 0.6 ohm coil for RDTL, a 50/50 freebase e-liquid at 3mg to 6mg suits the slightly warmer, airier draw. For the 0.4 or 0.8 ohm coils bought separately, 50/50 e-liquid at up to 6mg is a safe starting point.