Elf Bar ELFX Pod Kit: key specifications
| Specification | Detail |
|---|---|
| Battery | 1000mAh rechargeable, USB-C |
| Output | 5 to 30W, auto-adjusts to pod resistance |
| Pod capacity | 2ml refillable, top-fill |
| Pods included | One 0.6 ohm QUAQ dual mesh pod and one 0.8 ohm QUAQ dual mesh pod |
| Firing method | Inhale activated, no buttons |
| Airflow | Adjustable airflow slider on side |
| Battery indicator | RGB colour-changing LED |
| Best used with | Elfliq nic salts, 50/50 or high PG e-liquids |
| USB-C cable | Included |
| Compliance | UK TPD compliant |
About the Elf Bar ELFX Refillable Pod Kit
The Elfbar ELFX is Elf Bar's first refillable pod kit and sits at the gateway between disposable simplicity and a full refillable setup. The device fires by inhale and auto-adjusts its wattage to whichever pod is installed, so there are no settings to configure. The QUAQ dual mesh coil inside each pod gives twice the coil surface area of a standard single mesh pod, which means better flavour and a longer pod lifespan. When the coil reaches the end of its life, you replace the entire pod rather than just the coil.
The 0.8 ohm pod is designed for tight MTL vaping, close to the draw of a cigarette or disposable vape. The 0.6 ohm pod gives a slightly looser, more airy draw for vapers who prefer a little more airflow. Both pods hold 2ml of e-liquid and use the same top-fill system: lift the silicone plug, fill, replace the plug. Filling without removing the pod from the device. For the Elf Bar flavour experience in a refillable format, the Elfliq nic salt range uses the same recipes as the original Elf Bar disposables and prefilled pods.
Elf Bar ELFX Pod Kit colours
The ELFX Pod Kit is available in 6 colours. The device is identical across all colours. Click any colour to go to that product.
Elf Bar ELFX replacement pods
The ELFX uses top-fill refillable pods with built-in QUAQ dual mesh coils. When the coil burns out or flavour fades, you replace the whole pod. Two resistances are available to suit different vaping styles.
| Pod | Resistance | Best for |
|---|---|---|
| ELFX 0.8 ohm Pod | 0.8 ohm | Tight MTL draw, closest to cigarette feel |
| ELFX 0.6 ohm Pod | 0.6 ohm | Slightly looser RDTL draw, more airflow |
| ELFX Pods Bundle | Both resistances | Bundle pack containing both pod types |
How to use the Elf Bar ELFX Pod Kit
Charge the device using the included USB-C cable before first use. Insert your chosen pod into the magnetic connection at the top of the device. To fill the pod, turn the device on its side, lift the silicone fill plug on the side of the pod, fill with your chosen e-liquid, and replace the plug. Allow 10 minutes for the e-liquid to soak into the coil before vaping. Inhale to activate. To adjust draw tightness, use the airflow slider on the side of the device. The RGB LED shows battery level: green is above 80%, yellow is 40 to 80%, orange is 20 to 40%, and red is below 20%.
Buy the Elf Bar ELFX Refillable Pod Kit from e-liquids.com
- All 6 colours in stock
- Both 0.6 ohm and 0.8 ohm replacement pods available
- Pair with any Elfliq nic salt for the original Elf Bar flavour experience
- Free UK delivery on all orders over £20
- Same-day dispatch on orders placed before cut-off
- All products genuine and UK TPD compliant
- UK-based customer team on 0121 272 2900
Elf Bar ELFX Pod Kit: frequently asked questions
What e-liquid should I use with the Elf Bar ELFX Pod Kit?
The ELFX works best with 50/50 or high PG e-liquids including nicotine salts. For the original Elf Bar flavour experience, pair it with Elfliq nic salts, which use the same recipes as the original Elf Bar disposables and prefilled pods. The ELFX is not designed for high VG shortfill e-liquids as the thick consistency can cause poor wicking and burnt hits.
What is the difference between the 0.6 ohm and 0.8 ohm ELFX pods?
The 0.8 ohm pod produces a tighter, more restricted MTL draw similar to a cigarette or disposable vape. The 0.6 ohm pod gives a slightly looser, more airy draw for vapers who prefer a little more airflow. Both pods hold 2ml, use the same top-fill system, and have built-in QUAQ dual mesh coils. The device auto-adjusts its wattage for whichever pod is installed.
How long do ELFX pods last?
ELFX pods can be refilled multiple times before the coil burns out. The QUAQ dual mesh coil lasts approximately twice as long as a standard single mesh coil. Most users get several weeks of use from a single pod depending on how frequently they vape. Replace the pod when you notice a burnt taste or a significant drop in flavour quality.
Is the Elf Bar ELFX better value than the prefilled pod kits?
Yes, in the long run. The upfront cost of the ELFX device is higher but the running cost per ml is significantly lower than prefilled pods because you are buying e-liquid in 10ml bottles rather than sealed prefilled pods. A 10ml bottle of Elfliq delivers the same volume as five 2ml prefilled pods at a fraction of the price per ml.