Aspire Gotek X3 pod kit: key specifications
| Specification | Detail |
|---|---|
| Battery | 1200mAh built-in, USB-C 1A charging |
| Display | Small LCD showing battery level and power mode |
| Power modes | Eco, Normal and Max (cycled via side button) |
| Firing | Draw activated or button fired |
| Airflow | Adjustable bottom slider, MTL to RDTL |
| Included pod | 0.6 ohm Gotek mesh pod (2ml, UK TPD compliant) |
| Pod compatibility | Full Gotek pod range: 0.6, 0.8 and 1.0 ohm |
| Pod fill | Side fill |
| In the box | Device, 0.6 ohm Gotek pod, USB-C cable, user manual |
About the Aspire Gotek X3
The Gotek X3 builds on the original Gotek X with three meaningful upgrades: a significantly larger 1200mAh battery, an LCD display showing battery level and current mode, and three selectable power modes. Eco mode lowers output for longer battery life and tighter MTL vaping. Normal mode balances flavour and power for everyday use. Max mode increases output for warmer, denser vapour from the same pod.
The airflow slider at the base of the device is a physical control that sets the draw style independently of the power mode. Closed gives a tight, cigarette-style MTL draw. Open gives a looser RDTL inhale. The combination of airflow adjustment and three power modes means the Gotek X3 can be set up very differently depending on what the vaper prefers, even with the same pod installed.
The Gotek X3 uses integrated pod and coil units from the Gotek range. When the coil wears out and flavour drops, the whole pod is replaced. No separate coils are needed. The 0.6 ohm pod ships with the kit and suits RDTL and looser MTL at 15 to 18W. The 0.8 ohm pod suits tighter MTL at 13 to 16W and is available separately. Both work best with 50/50 nic salt e-liquid at 10mg to 20mg.
Aspire Gotek X3 colours
The Gotek X3 is available in 7 translucent colours. The colour name links to the product.
Buy the Aspire Gotek X3 from e-liquids.com
- All 7 Gotek X3 colours in stock
- Gotek replacement pods available in 0.6, 0.8 and 1.0 ohm
- Free UK delivery on all orders over £20
- Same-day dispatch on orders placed before cut-off
- UK-based customer team on 0121 272 2900
Aspire Gotek X3: frequently asked questions
What is the difference between the Gotek X3 and the Gotek X?
The Gotek X3 adds three upgrades over the original Gotek X: a larger 1200mAh battery versus the smaller capacity of the original, a small LCD display showing battery level and power mode, and three selectable power modes (Eco, Normal, Max). The original Gotek X has no screen and no power mode selection. Both devices use the same Gotek pod range and have the same adjustable airflow system.
Which pods are compatible with the Gotek X3?
The Gotek X3 is compatible with the full Aspire Gotek pod range. This includes the 0.6 ohm pod (included with the kit, best for RDTL at 15 to 18W), the 0.8 ohm pod (best for tight MTL at 13 to 16W), and the 1.0 ohm pod (tightest MTL draw). All Gotek pods are available in both 2ml TPD-compliant and XL versions. The same pods also fit the Gotek X, Gotek Pro and Gotek Nano devices.
What e-liquid should I use with the Gotek X3?
Use 50/50 VG/PG nic salt e-liquid at 10mg to 20mg for the best results with the included 0.6 ohm pod. The same applies to the 0.8 and 1.0 ohm pods. The Gotek X3 runs at relatively low wattages suited to thin, high-PG e-liquid. Using high-VG shortfill e-liquid in a Gotek pod will result in poor wicking and dry hits due to the thick consistency of high-VG liquid at low wattages.