Recommended products
The Profile 1.5 RDA by Wotofo brings a flavour experience that most others simply cannot match. Following in the footsteps of its predecessor, the much revered Profile RDA, the 1.5 can be used with three separate types of mesh: nexMESH CHILL, nexMESH TURBO and nexMESH EXTREME. These brand new Mesh strips feature 40% extra surface area, creating increased ramp-up time and richer flavour. The Profile 1.5 features a 22.5mm build deck for ample space to fit your favourite build, as well as being 24mm in diameter so it will fit snug on most vape mods on the market. A BF squonk pin is also included in the kit for all of your squonking needs! Make sure to apply this before using this RDA with a squonk mod to ensure your juice can feed through.
We recommend using high VG e-liquids ranging from 0-6mg in nicotine strength, providing you with a smooth hit and increased cloud production when paired with an RDA. We also suggest employing a Direct-to-Lung style of vaping.
This product is a rebuildable dripping atomizer and is only recommended for users with a working knowledge of building their own coils and Ohm’s law. If you are not of an advanced level and don’t have the prior knowledge of building your own coils, to do so would not be advised.
Key Product Features:
- Wotofo Profile 1.5 RDA
- 24mm diameter
- Squonk pin included
- 22.5mm build deck
- Mesh strips included
- Suited to Direct to Lung vaping
- Suited to high VG e-liquids
- Adjustable airflow
- 510 connection thread
- 810 drip tip
- Stainless steel build
- German PEEK insulator
What you get with the Wotofo Profile 1.5 RDA:
- 1 x Profile 1.5 RDA
- 1 x Spare 810 drip tip
- 1 x Coil bending tool
- 1 x Accessory bag
- 1 x Allen key
- 1 x Cross head screwdriver
- 3 x 6mm Xfiber cotton strips
- 1 x nexMesh CHILL KA1 0.15ohm mesh strip (60-80watt range)
- 1 x nexMesh TURBO KA1 0.13ohm mesh strip (60-80watt range)
- 1 x nexMesh EXTREME KA1 0.16ohm mesh strip (60-80watt range)
- User manual
Wotofo Profile 1.5 RDA Specifications
| Weight | 120g |
| Height | 33.1mm |
| Diameter | 24mm |
| Made in | China |
Have a question about this product? Get in touch with one of our Vape Experts!
The Wotofo Profile 1.5 comes in a variety of amazing colours and finishes.
Create amazing flavour thanks to high-quality and modern components.
The Wotofo Profile 1.5 is equipped with a squonk pin and 510 connector for optimal compatibility.
What vape juice should I use in the Profile 1.5 RDA?
The Profile 1.5 RDA is best used with high VG e-liquids ranging from 0-6mg in nicotine strength, you may also prefer to choose a Nicotine Salt Nic Shot instead of a freebase Nic Shot to further smoothen out the overall hit of your e-liquid. Due to the increased vapour delivery it’s best to use low nicotine strength high VG e-liquids to ensure a smooth hit with every inhale.
When should I change my coils in the Profile 1.5 RDA?
With all rebuildable atomisers (RBA) it’s best to continually check the look of your coils, if you notice that your coils look black and your cotton is discoloured then take your cotton out, and heat your coils up to clean any residue off them. If once you’ve done this the coils still look discoloured then it’s time to change! Other noticeable markers when your coils are coming to the end of their lifespan are a slightly burnt taste, or an overall drop in performance.
Can I use the Profile 1.5 RDA for squonking?
Yes you can! The Profile 1.5 RDA has a BF squonk pin pre-installed for all of your squonking needs. If you wish to use your RDA without squonking capabilities on a conventional mod, be sure to apply the 510 pin to avoid any unwanted leaks from the bottom of your RDA.
